New Energy Hot Pressing Mold Heating Tube

Short Description:

Our New Energy Hot Pressing Mold Heating Tube is a high-performance electric heating component designed specifically for the temperature control needs of new energy manufacturing processes, including battery module hot pressing, pole piece hot pressing, and electrode assembly production. Built with precision engineering and durable materials, it delivers uniform heat distribution, fast thermal response, and long service life to ensure consistent product quality and high production efficiency.


E-mail: kevin@yanyanjx.com

Product Detail

Product Tags

Product Overview

This heating tube is specially manufactured to meet the strict temperature uniformity and stability requirements of hot pressing molds in the new energy industry. It features a compact, robust structure that can withstand high-pressure, high-temperature working environments, making it ideal for embedding into hot pressing mold plates to provide reliable, repeatable heating for critical production steps.

详情页的图片

Technical Specifications

Cartridge heater for heating block
Working Voltage [Customizable, e.g., 220V / 380V AC]
Rated Power [Customizable, e.g., 500W–3000W]
Tube Diameter [Customizable, e.g., Φ6mm–Φ20mm]
Tube Length [Customizable based on mold size]
Sheath Material Stainless Steel 304 / 316L / Incoloy (optional)
Maximum Working Temperature [e.g., up to 600°C / 1112°F]
Insulation Resistance ≥ 100 MΩ (at 500V DC)
Dielectric Strength 1500V AC for 1 minute without breakdown
Thermal Insulation Material High-purity crystalline MgO powder
Resistance Wire Material Ni-Cr / Fe-Cr-Al alloy
Sealing Method Epoxy resin / silicone seal / ceramic seal (optional)
Terminal Style Threaded terminal / lead wire / connector (customizable)

 

Product Features

    • Excellent temperature uniformity: ensures consistent heating across the mold surface, eliminating hot spots and cold spots that could affect product quality.
    • Fast thermal response: rapidly reaches target working temperature to reduce warm-up time and improve production throughput.
    • High temperature resistance: suitable for continuous operation at elevated temperatures required for hot pressing processes.
    • Corrosion and oxidation resistant: constructed with high-quality stainless steel sheath to withstand harsh industrial environments.
    • High thermal efficiency: optimized heating element design minimizes heat loss and reduces energy consumption.
    • Customizable specifications: available in various dimensions, wattages, voltages, and termination styles to fit different mold designs and application requirements.
    • Long service life: built with high-purity MgO insulation and premium resistance wire for reliable, extended operation.

Common Troubleshooting

  • Fault Phenomenon

    Possible Cause

    Solution

    Heating tube does not heat up after power on Poor lead wire contact or wire breakage; heating wire burnout Check wiring and reconnect firmly; if heating wire is burnt out, replace the heating tube
    Slow heating speed Voltage mismatch; insufficient contact with sealing jaw Confirm rated voltage matches the equipment; reinstall to ensure close contact
    Poor sealing quality, uneven sealing Uneven tube surface temperature; loose fixing, heat conduction barrier Tighten fixing screws; clean installation surface to ensure good heat conduction
    Electric leakage of heating tube shell Moisture enters the tube; insulation layer is damaged Stop using immediately, dry test the tube; if insulation is still unqualified, replace it

Precautions

Warning:

Do not operate the heating tube beyond its rated voltage and power specifications, as this may cause overheating, premature failure, or safety hazards.

  • The heating tube must be fully embedded in the mold during operation; do not allow it to heat in open air for extended periods without proper thermal conduction.
  • Regularly inspect the tube sheath for signs of corrosion, deformation, or damage; replace damaged tubes promptly to avoid leakage or failure.
  • Ensure good grounding of the heating tube and equipment to prevent electric shock risks.
  • Keep terminal connections clean and dry to prevent short circuits or insulation degradation.
  • Do not disassemble or modify the heating tube without manufacturer authorization, as this will void the warranty and may compromise safety.

Order Guidance

图片1

Step 1: Verify that the heating tube dimensions, voltage, and power match the mold design and power supply requirements before installation.

Step 2: Clean the installation holes in the mold plate to remove debris, oil, and burrs; ensure the hole diameter matches the tube diameter with a proper fit.

Step 3: Insert the heating tube gently into the designated hole; avoid excessive force or bending that could damage the sheath or internal components.

Step 4: Secure the tube using the appropriate mounting hardware (e.g., threaded fittings, locking nuts) according to the mold design.

Step 5: Connect the power supply terminals correctly, ensuring tight, secure connections and proper insulation to prevent electrical hazards.

Step 6: Conduct a no-load test first to check for proper heating function, insulation performance, and temperature stability before loading production materials.

Product Application

  • New energy battery module hot pressing processes
  • Lithium-ion battery pole piece hot pressing
  • Electrode assembly and cell manufacturing equipment
  • Hot pressing molds for composite material forming
  • Industrial heating platens and thermal press equipment
  • Other precision heating applications requiring uniform temperature distribution
Waterproof cartridge heaters
Custom cartridge heaters

Certificate and qualification

certificate

Team

Team

Product packaging and transportation

Equipment packaging

1) Packing in imported wooden cases

2) The tray can be customized according to customer needs

Transport of goods

1) Express (sample order) or sea (bulk order)

2) Global shipping services

Equipment packaging
Logistics transportation

  • Previous:
  • Next: